Great Lakes
Great Lakes ENSAB19
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
| Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
| EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
| 7000 Series | |||||||||
| 70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
| 70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
| 7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
| 70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
| 9500 Series | |||||||||
| 9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
| 9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
| 6800 Series | |||||||||
| 6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
| 6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
| 6500 Series | |||||||||
| 6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
| 6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
| 6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
| 4500 Series | |||||||||
| 4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
| 4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
| 1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch | |||||||||
Based on your switch/equipment, choose the appropriate EN enclosure or ES enclosure. Take into consideration your cable management, cooling, and power needs; each enclosure addresses these needs in different ways. Baffle Kit part numbers are specific to EN or ES Enclosures.
The Baffle Kit Matrix below shows which kits accommodate various Cisco switches. Other brands of side-to-side airflow equipment can also be mounted. To determine the correct enclosure and baffle kit, compare physical equipment dimensions to what is listed.
| Recommended Great Lakes Enclosures | Great Lakes Baffle Kit Part No. | CISCO Equipment Dimensions | CISCO Recommended Clearances | ||||||
| EN Series Enclosure | ES Series Enclosure | EN Baffle Kit | ES Baffle Kit | RMU | Depth | Distance from equipment to wall (i.e. enclosure side panel, or side of baffle kit) | |||
| 7000 Series | |||||||||
| 70181 | 40"W x 48"D | N/A | ENSAB25 | N/A | 25 | 33.1 | 11 | ||
| 70102 | 32/40"W x 48"D | 30"W x 48"D | N/A | N/A | 21 | 33.1 | N/A | ||
| 7009 | 40"W x 48"D | N/A | ENSAB14A | N/A | 14 | 24.10 | 11 | ||
| 70043 | 40"W x 48"D | N/A | ENSAB7A | N/A | 7 | 24 | 11 | ||
| 9500 Series | |||||||||
| 9513 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14D | ESSAB14D | 14 | 28 | 6 | ||
| 9509 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.40 | 2.50 | ||
| 6800 Series | |||||||||
| 6807-XL | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 18.10 | 6 | ||
| 6880-X5 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB5D23 | ESSAB5D23 | 5 | 23 | 6 | ||
| 6500 Series | |||||||||
| 6513(-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB19 | ESSAB19 | 19 | 18.10 | 6 | ||
| 6509 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 18.10 | 6 | ||
| 6506 (-E) | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB11 | ESSAB11 | 11 | 18.10 | 6 | ||
| 4500 Series | |||||||||
| 4510R | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB14 | ESSAB14 | 14 | 12.50 | 6 | ||
| 4506 | 32"W x 42/48"D | 30"W x 42/48"D | ENSAB10D18 | ESSAB10D18 | 10 | 12.50 | 6 | ||
| 1 Four post mounting is required with a rail placement of 24" 2 The 7010 has front to rear airflow; no left or right side clearance is requried; when installed in a cabinet, 5" rear clearance is required 3 The 7004 requires 11" clearance on the right (instake) side only; exhaust exits from the rear, no rear clearance required NOTE: It is important to read and undersand CISCO installation guides that are associated with each switch | |||||||||