Kendall Howard 1927-3-002-00

2-piece rack conversion kit - anchor a 2-post rack to the wall, limit the risk of the rack tipping over, or enforce 4-piece rack conversion kit.

The Kendall Howard 2-piece rack conversion kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. This design will work with virtually any Telco rack on the market. Cage nut or 10-32/M6/12-24 pre-tap styles are no problem. Simply screw the conversion arms into the back of the front Telco rack and the front of the back Telco rack and you have a fully functional adjustable 4 post rack. Adjustable range is from 20"-35" (+ the width of your telco rack). If you have to move or replace a rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 2-Piece Conversion Kit provides a safe and dependable solution. The 2-piece rack conversion kit can also be used with the 4 piece Rack Conversion Kit to make your 4 post conversion even stronger.